WebStructural

Topographic Factor (Kzt) Calculator

Click the map to find Kzt from USGS elevation data, to ASCE 7-16 and 7-22 section 26.8.

Ground along the wind

Pick a site to see the ground the wind crosses.

Site

Or click the map, or drag the pin.

Usually the mean roof height.

Kzt

Pick a site on the map or enter an address.

How the calculator finds Kzt

Wind speeds up as it climbs over a hill, ridge or escarpment, and ASCE 7 section 26.8 accounts for that with the topographic factor Kzt = (1 + K1K2K3)², which multiplies the velocity pressure qz. Working it out by hand means reading contour maps for the hill's height H, its half-length Lh and the site's distance from the crest x. This calculator does that from the USGS 3D Elevation Program's 1/3 arc-second (about 30 ft) bare-earth elevation model.

For 16 wind directions it samples the ground every 10 m (33 ft) along the wind through the site and finds the crest, the foot of the hill upwind and Lh. It then checks the five conditions of section 26.8.1:

  1. The hill is isolated: upwind ground within 2 miles rises no more than half as high.
  2. It stands at least twice as high as upwind terrain within 2 miles.
  3. The site is in the upper half of the hill or near the crest of an escarpment.
  4. H/Lh is at least 0.2.
  5. H is at least 15 ft in Exposure C and D, or 60 ft in Exposure B.

When they're all met, K1, K2 and K3 come from Figure 26.8-1 for a 2D ridge, a 2D escarpment or a 3D hill. The calculator guesses the shape from the ground downwind and across the wind, and when it can't tell it takes the more cautious one. Pro lets you choose the shape for each direction. When any condition isn't met, Kzt is 1.0 for that direction.

The map's 3D terrain is for looking at the site; the numbers come from the USGS model. Check the profile against what you know of the site: the model is bare earth, without buildings or trees, and cuts and fills newer than the survey aren't in it. Use the Kzt in the Wind Load Calculator. For the method step by step, with a worked example, see how to calculate Kzt.